First Deck Railing Installed! 5 left...
Manisha & I installed the first railing as well as the wiring as follows:
- Cut a 12-gauge outdoor lighting wire to a length of about 4'6" (i.e. make a "pigtail")
- Thread the wire through a railing post cover, and insert cover with base cap over a railing post so the wire comes out 6" at either end
- Connect top end of wire to cap light, and place cap light on post
- Attach railing post cover to post using screws
- Repeat above steps for next post
- Cut top & bottom railings to size - both vinyl (sleeve) and metal (inside rail) parts of each
- Screw in center support into bottom rail
- Place bottom rail on 4x4 stock, and position between two posts. Screw in end caps into place
- Insert balusters into bottom rail slots
- Place top rail on balusters - align balusters with slots in top rail
- Press top rail into place, check level and screw in end caps into place.
- Connect post light pigtail to perimeter lighting wire.
0 Comments:
Post a Comment
<< Home